Engine rebuild for more power. Camshaft???

This board should be in english only and contains everything worth to discuss.
kkwadk
Wenigposter
Wenigposter
Beiträge: 1
Registriert: Do Sep 15, 2016 23:37

Engine rebuild for more power. Camshaft???

Beitragvon kkwadk » Fr Sep 16, 2016 0:04

I currently have a stock 82 xt500 engine running a TM36 carburettor, KN filter and a 44mm Exhaust system with supertrapp and 16 discs.

Its been using some amount of oil this summer so now its time for a top end rebuild.

The rebuild specs are.

Wiseco 90mm piston 11-1 compression
49mm inlet valve, stock exhaust and ported head.

I need advice on the rockers, camshaft and springs?

The bike is used for street use and little off-road, but likes to pop wheelies from time to time so i could use some more torque as well.

Best regards

Kasper from Denmark

Benutzeravatar
Mambu
XT500-Online-Berater
XT500-Online-Berater
Beiträge: 754
Registriert: So Jun 01, 2003 10:55
Wohnort: Grießen

Re: Engine rebuild for more power. Camshaft???

Beitragvon Mambu » Sa Sep 17, 2016 15:24

Hi Kasper,

I would take a 88 or 89 mm Wiseco, compression ratio max. 10:1, works better. As camshaft I would prefer a "FS1", it can be used with the stock springs. But of course, there are a lot other possibilities...

Regards Mambu

Pokora06
Wenigposter
Wenigposter
Beiträge: 1
Registriert: Mo Mär 13, 2017 23:47

Re: Engine rebuild for more power. Camshaft???

Beitragvon Pokora06 » Mo Mär 13, 2017 23:48

I currently have a stock 82 xt500 engine running a TM36 carburettor, KN filter and a 44mm Exhaust system with supertrapp and 16 discs.

Its been using some amount of oil this summer so now its time for a top end rebuild. Regroupement de prêt

The rebuild specs are.

Wiseco 90mm piston 11-1 compression
49mm inlet valve, stock exhaust and ported head.

I need advice on the rockers, camshaft and springs?

The bike is used for street use and little off-road, but likes to pop wheelies from time to time so i could use some more torque as well.

Best regards

Kasper from Denmark
, hello, i would take 89mm


Zurück zu „International“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast